Home / Building Maintenance / Commercial Glass / Commercial Glass Repair

Commercial glass guide

Commercial Glass Repair: A Property Manager's Complete Guide

Glass is part of security, safety, energy use and first impressions. Knowing how it fails and how repairs are handled helps you act quickly and spend wisely.

What counts as commercial glass

In a typical commercial property, glass shows up in more places than the storefront. A complete inventory usually includes:

  • Storefront systems and entrance doors
  • Operable and fixed windows
  • Curtain wall and window wall on mid- and high-rise buildings
  • Interior glass partitions, sidelites and conference room fronts
  • Skylights, canopies and glass railings
  • Mirrors and display glass in tenant spaces

Record the location, size, glass type and frame system for each area. That record speeds up quotes and emergency repairs, because the contractor knows what to bring.

The most common problems

ProblemWhat you may noticeTypical response
BreakageCracks, shattered panes, impact marksSecure the area, board up if needed, replace the glass
Failed insulated unitsFogging or moisture between panesReplace the sealed unit; the frame can often stay
Sealant and gasket failureDrafts, leaks, loose or shrinking gasketsReseal or replace gaskets before water damage spreads
Door hardware wearDoors that drag, slam or will not latchAdjust or replace closers, pivots, hinges and locks
Frame damageBent mullions, corrosion, impact damageRepair or replace sections of the frame system

Safety comes first

Broken glass injures people, and a damaged entrance can block an exit route. When glass breaks, keep people away, mark off the area and arrange a temporary barrier or board-up. Do not ask maintenance staff to remove large broken panes overhead; that is work for a trained glazier.

Building codes require safety glazing in many locations, such as doors and glass near walkways. When you replace glass, the new glass must meet current code for that location, even if the original did not. See our guide to safety glass types.

How a repair usually goes

  1. Make the area safe and secure the opening.
  2. Document the damage with photos and notes, including the cause if known.
  3. Call your approved glazing contractor and describe the glass type, size and location.
  4. Approve temporary protection and the permanent repair within your spending authority.
  5. Notify the owner, the tenant and, where appropriate, the insurer.
  6. Inspect the finished work and file the invoice, photos and product details.

Choosing who does the work

Use a commercial glazing contractor with experience in your type of frame system, current liability insurance and, where your state requires it, the right contractor license. Ask whether they offer 24-hour emergency service. Our contractor hiring guide lists the questions to ask.

Keep good records

A short file for each building pays off: glass inventory, warranty documents, past repairs, contractor contacts and photos. It shortens the next emergency and gives owners a clear picture of where money is going.

Questions

Common questions

A small crack may be stable for a short time, but cracks can spread with temperature changes, wind and vibration. Have it assessed promptly, and secure it right away if it is in a door, at ground level or overhead.

The lease decides. Many retail leases make the tenant responsible for storefront glass, while others leave it with the landlord. Check the lease and any glass insurance before authorizing work.

Plan glass maintenance before something breaks

Put entrance, window and curtain wall checks on the annual calendar, and keep an emergency glazing contact on file for every building.