Home / Building Maintenance / Commercial Glass / Preventing Storefront Glass Failures in…

Commercial glass guide

Preventing Storefront Glass Failures in Commercial Buildings

Most storefront failures give warning signs first. A simple prevention routine catches small problems before they become broken glass or a closed entrance.

Why storefronts fail

  • Doors that slam because closers are worn or out of adjustment
  • Settling or shifting that puts stress on the glass
  • Failed sealant and gaskets that let water reach frames and anchors
  • Vehicle and cart impacts near parking areas and loading zones
  • Vandalism and attempted break-ins
  • Thermal stress on tinted or partly shaded glass

Simple monthly checks

  • Watch each entrance door open and close; it should not slam or drag
  • Check that locks, panic hardware and thresholds work
  • Look for new chips, cracks or scratches, especially near edges
  • Look for missing or loose gaskets and gaps in sealant
  • Check for water stains or rust at the bottom of frames

Protect against impact

Where vehicles park facing the storefront, bollards or wheel stops can prevent costly damage. Keep carts, dumpsters and landscaping equipment away from glass. For locations with repeated break-ins, consider security glass, film or grilles.

Keep water out of the system

Storefront frames are designed to drain water that gets past the outer seal. Weep holes blocked by dirt or paint stop that drainage. Have your contractor check weeps and perimeter sealant during the annual inspection, and reseal joints before they open up.

Work with tenants

Tenants often cause storefront damage without realizing it, by propping doors open, hanging heavy signs or applying films. Put clear rules in the lease or tenant handbook, and ask tenants to report door problems right away.

Questions

Common questions

Many busy entrances benefit from a professional check of closers and pivots at least once or twice a year, and sooner if the door begins to slam or drag.

Film does not make glass unbreakable, but security and safety films can hold broken glass together, which slows intruders and reduces flying shards.

Plan glass maintenance before something breaks

Put entrance, window and curtain wall checks on the annual calendar, and keep an emergency glazing contact on file for every building.