Home / Building Maintenance / Commercial Glass / Commercial Window Leaks

Commercial glass guide

Commercial Window Leaks: Identifying Problems Before Major Damage

A small window leak can quietly damage drywall, flooring, insulation and tenant property. The sooner you find the source, the cheaper the fix.

Warning signs

  • Water stains on sills, walls or ceilings below windows
  • Bubbling paint, swollen drywall or loose baseboards
  • Damp carpet along exterior walls
  • Musty smells near windows
  • Condensation or fogging between panes
  • Rust at the bottom of frames or anchors

Common causes

CauseWhat happens
Failed perimeter sealantWater gets in around the frame where it meets the wall
Shrunken or missing gasketsWater passes between the glass and the frame
Blocked weep holesWater that enters the frame cannot drain out
Damaged flashingWater enters at the head or sill of the opening
Frame joints opening upCorners and splices separate over time
CondensationMoisture forms on cold glass and frames inside the building

Leak or condensation?

Not every wet sill is a leak. Condensation forms on cold surfaces when indoor humidity is high, often on cold mornings, and does not depend on rain. A leak shows up during or after rain or wind-driven storms. Tracking when water appears is the fastest way to tell the difference.

How investigation works

  1. Record when and where water appears, with photos.
  2. Check the exterior for open sealant joints, missing gaskets and blocked weeps.
  3. Ask a glazing or envelope contractor to investigate, sometimes using controlled water testing.
  4. Repair the source before replacing damaged interior finishes.
  5. Check that wet materials are dried properly to prevent mold.

Prevent the next leak

Add sealant, gasket and weep checks to the annual inspection, and plan resealing before joints fail completely. For larger buildings, see curtain wall inspection and maintenance. If water has already spread, our water damage guides cover drying and documentation.

Questions

Common questions

Surface caulking sometimes stops a leak for a while, but it can also block drainage and trap water inside the frame. Find the real source first.

A commercial glazing contractor or a building envelope consultant. For repeated or hard-to-find leaks, controlled water testing is often the quickest way to locate the source.

Plan glass maintenance before something breaks

Put entrance, window and curtain wall checks on the annual calendar, and keep an emergency glazing contact on file for every building.